Exo Terra Repti Flo 200 pump

Product detailed description

Multipurpose submersible pump for terrariums and aquariums. Designed for fresh water only.

The pump is intended for use in aquariums or terrariums, such as for terrarium waterfalls, water circulation, etc. Place the pump on the bottom of the terrarium, in clean water. Sand or debris will cause premature clogging of the internal parts of the pump, or they may stop the pump from working completely. Therefore, ensure that the water does not contain large amounts of impurities, as this is the only way to prevent damage to the impeller cover or the impeller itself. If there is fine sand in the aquarium, it is necessary to use Repti Flo foam (available separately) as a prevention against clogging. Connect the pump to the electrical network. The pump must be filled with clean water when used for the first time. If the pump does not start working immediately, shake the pump gently to release any air bubbles.

The pump is suitable for use in water up to +35 oC. 

Ensure that the pump is completely submerged in water during operation - the pump must never run dry!